1.6mm Brass Baseplate for 1/24 Model Cars. Low COG, uses same mounting points as standard Plafit S24 chassis parts.

€ 12.90 each

Email me to enquire.

1.6mm Brass Baseplate for 1/24 Model Cars. Low COG, uses same mounting points as standard Plafit S24 chassis parts. Slightly wider front end for additional weight.

€ 12.90 each

Email me to enquire.

1.00mm Carbon Fibre Bodymount Plate, Front Bearing Mount, Guide Tongue and Body Weight spacers. Much lighter and stronger than standard Aluminium parts. T Plate accepts either rear bearing holder or front blocks for Ind Fronts.

€ 14.90 per complete set

Email me to enquire.

The new technology chassis from Plafit. Completely different from their standard design above. All parts are new, and spares are totally different from the 1300 type chassis.

Approx R 750-00

or

ACE HOBBIES AUSTRALIA

The lower picture, showing the SLP chassis designed specifically for Europe and the DPM. Features a thicker baseplate to the S24. otherwise identical.

Approx € 46-00 excl Motor, Wheels, Axles, Bearings etc.

or

H & T MOTOR RACING GERMANY

The Latest update from Plafit, again, technology changes driven by the German modellers specifically for use with wide Group C type bodies. One piece heavy base plate, minimal adjustment.

Approx € 46-00 excl Motor, Wheels, Axles, Bearings etc.

or

H & T MOTOR RACING GERMANY

#Metris Slotcar (new Austrian chassis by Hans-Peter Hillbrand, indestructible, without axles; without ball bearings, without spur gear and without wheels). Good weight balance. It seems one of the most professional model car chassis actually on the market. A serious improvement of the former Mk2.0 chassis which failed to convince.

Approx € 72-00 excl Motor, Wheels, Axles, Bearings etc.

or

BLECK CENTER GERMANY

T#MSC-2013K - Exists in three verion; (1) with a steel ground plate 1.5 mm thick, with a steel ground plate 1 mm thick (MSC-201KS) and with a titanium ground plate (MSC-2013T), all sold at the same price.

Approx € 80-00 excl Motor, Wheels, Axles, Bearings etc.

or

CRIC CRAC SPAIN

#PF9700R (already assembled springsteel chassis), incl. 4 brass bearings, incl. 3mm axles, incl. spur gear, with guide & guide nut; needs 4 ball bearings, other spur gear and other wheels) Seriously improved version of the #PF9611. Much more solid than any other chassis. Front and rear axles adjustable in height. Suspended front wheel section.

Approx € 85-00 excl Motor, Wheels, Axles, Bearings etc.

or

CRIC CRAC SPAIN

#PF9611 (springsteel chassis, incl. 4 ball bearings, incl. 3mm axles, incl. spur gear, with guide & guide nut) - to be used on all cars.

Approx € 80-00 excl Motor, Wheels, Axles, Bearings etc.

or

CRIC CRAC SPAIN

#20512 (chassis in "Anodized Steel" with suspension, without 6mm ball bearings, without 3mm axles, without spur gear, without guide and guide nut; bottom plate in springsteel is 2mm thick, ensuring a low centre of gravity).

Approx € 40-00 excl Motor, Wheels, Axles, Bearings etc.

or

JENS SCALE RACING GERMANY

(already assembled, incl. 4 ball bearings, incl. 3mm axles, incl. lightweight kit and alu wheelholders in front and rear; with new and stronger ground plate; without spur gear, without guide & guide nut)

Approx € 65-00 excl Motor, Wheels, Axles, Bearings etc.

or

JENS SCALE RACING GERMANY

Non adjustable height of front and rear axle, but for 26.5 mm high front wheels and 27.5mm high rear wheels (as used by IMCA). Very low centre of gravity and adjustable lateral weight sets. Two holes in the piece just behind the front axle allow that the motor wires cannot rub the front axle.

Approx € 45-00 excl Motor, Wheels, Axles, Bearings etc.

or

SLOTRACING WERKS GERMANY

Dieter Jens in Germany sells complete kits for the Group C series, including an open class chassis and a plastic model car kit. The supplied motor and gearing and wheels however require changing to our standard equipment.

Approx € 110-00 excl Motor, Wheels

or

JENS SCALE RACING GERMANY

Similar to the Fox2 motor in the Plafit Classic Series, we use only the Scaleauto 25 000 rpm motors, medium or long can for the Open Class. Avilable from Alan in Cape Town, or from a variety of online International Shops.

R 120-00 from Alan

or

PENDLESLOT RACING UNITED KINGDOM

Hop up part for the Plafit 1700 S24 or SLP chassis. this converts the front setup to a -3' cambered angle, with Independent axles. Not 100% proven this offers an added advantage, but it does look cool.

Approx R 300-00

or

ACE HOBBIES AUSTRALIA

Pre fitted with Procomp Sponge, and regularly used in Hand Out events, these are precision racing rims. Very difficult to obtain.

Approx R 120-00 per pair

or

CRIC CRAC SPAIN